Dyson unveils its latest floorcare technology, designed to deliver powerful, hygienic clean on hard floors, across large spaces.
With a 1-litre clean water tank to cover flooring up to 290m2 in a single charge, the Dyson WashG1™ uses a combination of hydration, absorption and extraction technologies to rapidly remove wet and dry dirt and tough stains in one go – automatically separating it out, so maintenance is more hygienic.
Pioneering separation technology for hygienic maintenance
Dyson’s unique separation technology divides debris and dirty water at source, for hygienic, no-touch disposal.
Dirty water is extracted from the rollers by a durable mangle, whilst secondary nylon bristled inner brush bars remove dirt and debris from the microfibre rollers, flicking it straight into a removable debris tray.
The debris tray has been designed with a 500-micron mesh to separate dirty water from the large debris. Powered by an extraction pump, dirty water is immediately collected in a 0.8-litre capacity dirty water tank without allowing large debris to pass through the machine.
Keeping the dirt and debris in the head of the machine and the dirty water in a separate tank allows for easy and hygienic disposal.
To further support ease-of-maintenance for users, the Dyson WashG1™ has been intricately designed without sharp internal surfaces or crevices, to help lessen dirt or grime build-up inside the machine. Both water tanks have been designed with large openings to allow for easy maintenance and cleaning.
After use, the self-cleaning mode purges both rollers with clean water on the highest boost setting, flushing the entire system in preparation for the next clean.
Highly absorbent, counter-rotating rollers
Two individually powered rollers, counter-rotate whilst a pulse-modulated pump distributes water evenly across 26 hydration points, along the full width of each roller.
Each roller is made up of a unique, highly absorbent microfibre, with 64,800 filaments per cm2. This combination of high-density microfibre and consistent application of clean water ensures liquid spills are absorbed, whilst dry dirt, debris and hair are enveloped by the millions of high-density filaments.
By positioning two rollers at the front and back of the machine, Dyson engineers also achieved longer dwell time on stains with each pass, for powerful and fast stain removal.
Customised hydration control for an optimum floor finish
The Dyson WashG1™ has been designed with in-use hydration control, allowing owners to select the level of hydration required based on debris type, flooring and personal preference.
The low, medium, and high modes each run continuously once selected to provide increased levels of hydration. Each mode also features an additional three sensitivity settings to allow owners to fine-tune them to their individual cleaning needs.
A separate boost mode button purges each roller with the maximum amount of hydration when pressed for the removal of stubborn dirt and dried-on stains.
Manoeuvrability and edge-to-edge cleaning
To allow for edge-to-edge cleaning, the Dyson WashG1™ has been designed with two motors that sit within each microfibre roller.
For optimised manoeuvrability, Dyson engineers fine-tuned each motor to spin at a consistent speed in accordance with the hydration mode selected, allowing the machine to glide effortlessly whilst cleaning is in process.
Adopting technology from the Dyson Omni-glide, casters provide additional balance and weight support whilst the low cleaner head height allows for easy reach underneath furniture.
The Dyson WashG1 is not presently available in Malaysia. Consumers who are interested to be among the first to learn about pricing and availability may sign up to be notified here.
Visit www.dyson.my to learn more or follow Dyson Malaysia on Instagram or Facebook to receive the latest updates and details on the latest Dyson technology.
